Blackhawk   S.T.R.I.K.E. Commando Recon Chest Harness  •  Front plate pocket with inverted “T” elastic keeper can also   accommodate bib when plates are not in use for a lower   profile rig•  Plate pocket holds Level IV plates up to 10x12•  Cross-back design can be replaced with a plate carrier    back-panel (37CL41)•  S.T.R.I.K.E.™/MOLLE attachment allows the user to    configure pouches as needed•  Shoulder straps have double D-Rings and elastic/webbing   loops as additional attachment points, and are padded with    closed-cell foam for comfort  ..

Blackhawk   S.T.R.I.K.E. Rapid Mobile Plate Carrier  •  Protects the wearer’s exposed sides between front and rear    ballistic plates when worn with a standard vest•  Holds either an 8 X 10 or 10 X 12 ballistic plate (not   included) in one of two tailored internal pockets•  Can be worn over either shoulder or front/back with an   adjustable strap and includes an adjustable waist strap for    stability when moving•  Side-release buckles allow for quick mounting or removal•  Includes external MOLLE straps to mount holster, mag    cases, flashlight cases, medic pouches, etc.•  Options:    -  Keep on seat or in trunk of Patrol Car for first response       .....

Blackhawk  S.T.R.I.K.E. Cutaway Plate Carrier  •  Takes Level IV ballistic armor plates (up to 11x14) in fully   adjustable front and rear pockets •  Front plate pocket with inverted “T” elastic keeper can also   accommodate bib when plates are not in use for a lower    profile rig•  S.T.R.I.K.E. webbing on inside of front pocket provides   the internal platform to mount additional pouches or holsters•  Side plates: custom side plate pouch system holds plates   up to 6x8•  Lightweight: only 3.1 lbs; lightest cutaway plate carrier   available•  Ambidextrous for high performance•  Fast and easy to put on and take off using side release    buckles•  Secure release strap has a.....

Blackhawk Belt Pad   1000 Denier Nylon .375" closed cell foam (will not absorb sweat or water) Belt keepers fit up to 2.25" belt (not included)..

Blackhawk CQB Belt   MIL-STD-858 with parachute grade buckles and adapters 1.75" webbing (7,000 lb tensile strength) Hook and loop secures running end..

Blackhawk Enhanced Commando Recon Harness   •  Zipper along top edge of cummerbund allows for internal   storage; STRIKE webbing allows mounting of pouches or   holsters on inside•  Magazine pockets along front with quick release tabs and   dividers for up to eight M-16/M4 magazines•  Single plate pocket with inverted “T” elastic keeper for a    tri-curve plate up to 10x12•  Front plate pocket with inverted “T” elastic keeper can   also accommodate bib when plates are not in use for a lower   profile rig  ..

• Blackhawk Enhanced Military Web Belt    Side release buckles for quick-on, quick-off; no heavy   metal hardware•  Hook & loop size adjustment..

BlackHawk Law Enforcement Duty Belt   Ergonomically designed Duty Belt with padded edges Nylon loop backing mates to Duty Gear trouser belt ..

BlackHawk Law Enforcement Trouser Belt   Molded Nylon Loop Hook will not fray belt loops or trousers.  ..

Blackhawk Military Web Belt Extender   Expands the girth of Military Web Belt (41WB) when wearing vests or jacket.  ..

•  1 .75” wide; worn through uniform belt loops•  Enables attachment of BlackHawk® Duty Belt with gear    mounted•  Includes Duty Belt Keepers•  When sizing, add 3” to your actual waist lengthSPECIAL NOTE: When sizing add 3" to your actual waist length. Example: If your normal pants size is 33" add 3" to make 36" then choose our duty pants belt size 36." This will allow for 6 inches of hook and loop overlap when securing...

Blackhawk Patrol Belt Pad   •  Padded belt with STRIKE/MOLLE webbing•  Accommodates any STRIKE/MOLLE pouches•  Secured by 2.25 " side release buckle with adjustment    pull tabs..

Blackhawk Rope Deployment Carry Bag   Has internal loop to secure anchor end of rope (rope not included) Hook and loop slot for rapid rope deployment External webbing for attaching to belt, vest, pack or mounting extra gear 18" x 10D" Cubes 904" (200' rope)  ..

Blackhawk S.T.R.I.K.E. LBE Harness   S.T.R.I.K.E. / MOLLE webbing throughly intergrated for maximum configuration Large back panel covered with S.T.R.I.K.E. / MOLLE webbing Large kidney panel covered with S.T.R.I.K.E. / MOLLE webbing for butt packs Drag Handle..

Blackhawk Safety Lanyard   The BlackHawk PRL is designed to act as a personal lanyard when operating from helos, ships or at dangerous heights.  Attach locking carabiners to each end, one side clips to your CQB belt or rappel harness and the other end attaches to anything solid.    Tubular webbing and internal "chock cord" Five bartacks on each end secure the internal shock cord and create "biner" loops CAUTION:  Test, practice and be aware of capabilities prior to "real world" use.  Each situation and weight load is required to have proper planning and testing.  Single person use only.  ..

Blackhawk Special Operations H-Gear Shoulder Harness   .375" closed cell foam compressed between two heavy-duty layers of 1000 denier Fully adjustable and attaches to any belt up to 2.25" wide (belt not included) Heavy-duty drag handle  ..

Blackhawk Tactical Rappel Rope Bag   Holds up to 200 feet of lrope (rope not included) Outside pocket for carabiners Quick disconnect leg straps 22" x 5.5" x 8"  ..

Blackhawk Tactical Rappelling Harness Black    ..

•  Lightweight 1.75” wide belt with metal friction buckle•  One size fits all up to 52”..

CQC Pistol Belts   Ordinary dress belts are simply not the proper platform for carrying a handgun, spar mags or handcuffs.  Everyday dress belts don't have the stability needed to keep your handgun from rolling out and a heavier belt with a suit can scream "Armed Professional." These Carbon-Fiber and Lizard skin finished belts give you the same appearance as any other 1 1/4 inch dress belt that is made of premium materials, with the added benefit of a reinforcement spine.  ..

Nylon Duty Belt  Designed for quick-on, quick-off permanent size adjustment. Will not sag or twist. •  Made of two layers of nylon scuba belt webbing•  Contoured 2” side release buckle system•  Adjustable length  ..

S.T.R.I.K.E. Commando Recon Plate Carrier-Back Only  •  Can be combined with the 37CL01 S.T.R.I.K.E.™    Commando Recon Chest Harness for a full front/back rig•  Bottom has a large grommetted flap with hook & loop    closure that opens to insert up to a 10x12-in ballistic plate•  Patented IVS™ back panels for increased air    flow/ventilation•  Shoulder strap adapter included•  Reinforced drag handle  ..